Luxury Chandelier Solution

Yes, of course, we provide customized chandeliers for hotels, restaurants, villas. Adjust the overall height, width and chain length so that the chandelier looks balanced and elegant without looking overwhelming or too small.

Just tell me your ceiling height and installation area and we will recommend the right proportion and hanging height.

Yes, dimming and smart controls are on demand. I can equip your chandelier with a triac or 0-10 V driver for a simple wall dimmer or upgrade to a DALI, Tuya, or Zigbee module that allows you to adjust brightness and scenes via an app, voice assistant, or building management system.

The diameter of the chandelier should be roughly equal to 1/2-⅔ the width of the dining table (for a 100 cm wide table, choose a 50-65 cm fixture), and the bottom should be 75-90 cm above the tabletop when hung – high enough for sight lines and low enough for intimacy.

In double-height halls, add the width and depth of the luminaire (in centimeters) to match the length + width of the room ÷ 12, and leave a clearance of at least 210 cm below.

Most of the medium sized dining room chandeliers we supply weigh 8-15kg, while large hall chandeliers with crystals and drivers fitted can weigh 30kg or more.

If your fixture is over 15kg or your ceiling is plasterboard, you will need to fix a reinforced mounting in the joists or concrete.

For a sleek, maintenance-free look, choose our LED integrated pendant lights: built-in chip board, 50,000-hour life, and SCR/DALI dimming.

Want to change bulbs easily? Choose the E12/E14 or GU10 socket version; you can install any decorative LED filament or retrofit bulb and change the color temperature at any time.

Our drivers accept 110-120 volt and 220-240 volt power, so the same chandelier can be used in the US, Europe, the Middle East, or Asia without the need for an additional transformer.

Just let me know your local voltage and plug type and I’ll pre-wire the shade and label the leads.

The metal parts of the chandelier are epoxy primed to prevent rust, all screws are upgraded to 316 stainless steel and the crystal pins are sealed with silicone so they won’t rust or fog. The driver is mounted in a gasketed IP44 enclosure.

Of course. The dimensions of each hall chandelier are based on lumen calculations, not guesswork: ≈200 lumens per square meter of output.

So a 300-square-meter atrium gets 60,000 lumens from a single fixture or clustered array-the equivalent of installing dozens of downlights in a single sculptural piece.

We can provide you with a video or video call to see the actual lighting effects of the chandelier in the showroom.

Each chandelier leaves the factory in triple protective packaging: each crystal or glass arm is first wrapped in soft Styrofoam and then placed in a numbered compartmentalized tray; the entire frame is suspended in a double-layered export carton with shock-absorbing corners; and finally, the carton is slid into a fumigation-treated plywood crate.

We’d love to help you design a chandelier that reflects your brand image. Whether it’s a logo shape, color, we can translate those ideas into a custom design.